No Power To House

Losing all power to your house is disruptive and worrying, especially after hours. Sydney Power Group (SPG) is on call 24/7 across Greater Sydney to find out why and get your supply back safely.

The cause could be a tripped main switch, a faulty safety switch that won't reset, a consumer mains problem, or a loss of supply from the network. As a Level 2 ASP, we can diagnose and repair all of these.

Common Causes of No Power

A tripped main switch or safety switch (RCD) is one of the most common reasons for total power loss — often triggered by a faulty appliance or a wiring fault somewhere on the property. If your safety switch trips again immediately when you try to reset it, stop and call an electrician; something is drawing a dangerous fault current.

Other causes include a failed consumer mains, corroded connections in an ageing switchboard, or a supply fault from the network. A quick check of whether neighbours have power helps point to the likely source — see our power outages guide.

How SPG Restores Your Power

Our electricians carry out safe isolation, then methodical fault finding to pinpoint the exact problem — rather than guessing. Once identified, we carry out a compliant repair, whether that's a switchboard component, damaged wiring, or the consumer mains.

Because we're a Level 2 ASP, if the fault is network-side we can coordinate with Ausgrid, Endeavour Energy or Essential Energy and perform authorised supply work others can't.

Call for Immediate Help

No power is an emergency worth acting on straight away. Call SPG on 0466 125 125 now, or book emergency help and we'll respond fast, any hour.

Browse all urgent services on the emergency electrician hub.